A little help, right here

Ready for your
next shot.

Setup, camera compatibility, and the answers you need to get started.

What is WristShutter?

WristShutter is a watch-only camera remote for Apple Watch running watchOS 10 or later. It connects directly to compatible camera hardware using Bluetooth. No companion iPhone app or account is required.

Check your camera first

Bluetooth alone does not guarantee compatibility. Your camera must support the remote-control protocol used by WristShutter. The project’s documented hardware testing covers photo capture and video start/stop on the Sony RX100M7A. Other camera models have not been verified.

Pair for the first time

  1. Turn on your camera and enable its Bluetooth remote-control function. On the documented Sony model, enable Bluetooth Function and Bluetooth Rmt Ctrl, then open the pairing screen.
  2. Open WristShutter on Apple Watch and allow Bluetooth access.
  3. Tap the gear icon to open Settings, then select your camera under Nearby Devices.
  4. Accept the pairing request on your camera if prompted. Keep both devices nearby and wait for the app to show Ready.

Make the shot

Photo Mode

Select Photo, then tap the shutter. After a three-second countdown, WristShutter sends the photo command to your camera.

Video Mode

Select Video, then tap the shutter to begin a three-second countdown and send the recording command. Tap again to stop recording immediately. Check your camera’s shooting mode if it does not respond as expected.

The three-second countdown

The countdown runs before a photo or the start of video recording. Stopping a recording is immediate. The shutter is available once a compatible camera is connected.

Automatic reconnection

The app remembers your previously paired camera locally on the watch and attempts to reconnect when it is available. Keep the camera awake with Bluetooth remote control enabled. Manual Disconnect ends the current connection; select a device in Settings to connect again.

Troubleshooting

My camera doesn’t appear

Keep the watch and camera nearby, check that Bluetooth and remote control are enabled, and open the camera’s pairing screen. Open WristShutter Settings to scan. Check whether another remote or app is holding the connection.

Bluetooth permission is missing

Check the Bluetooth privacy settings on Apple Watch and allow WristShutter access. Reopen the app after changing the permission.

The app connects, but the shutter doesn’t work

A discovered device is not necessarily compatible. Check the camera’s shooting mode, remote-control setting, battery, and storage. Confirm pairing on the camera. Disconnect and select it again in WristShutter Settings.

Recording status looks wrong

Check recording on the camera itself. Connection loss or changes made directly on the camera can affect the watch’s status. The camera remains the source of truth for whether your photo or video was saved.

Read our Privacy Policy for details about local Bluetooth communication and preferences.

Contact

Developed by Fatih Akpınar.

For support or privacy questions, email app.fatihakpinar@gmail.com. Include your camera model, watchOS version, and a description of the issue.